Hotowell Suppliers Fluid High Pressure Water Flow Switch

• Customization: Available
• Type: Electronic
• Number of Switch: Single Control Switch
• Model NO.: HTW-F16KB
• Structure: Power Built-in Type
• Usage: Change-over Switch
• Application: Home, Commercial, Industrial, Vehicles
• Explosion-proof Type: Flameproof
• Contact: Normally Open
• Contact Type: Type c Contact
• Detection Method: Retro-reflective Mode
• Brand: Honeywell
• Certification: ISO9001, CE, CCC
• Resistence Load: AC 125 V(5A) /AC 250 V( 2.5A)
• Transport Package: Carton
• Specification: 1/2~1 inch
• Trademark: Neutral
• Origin: Xiamen, China
• HS Code: 84159090
• Production Capacity: 500000/Year

Product Description

General

Johnson Paddle Pump Water Flow Switch F16KB-11C(HTW-F16KB) series are designed to provide excellent performance where accuracy, reliability, and rugged construction (IP54)are required used in liquid flow lines carrying water or any fluid neither harmful to brass and prosphor bronze nor classified as a hazardous fluids.

They can be wired to close one circuit and open a second circuit when liquid flow either exceeds or drops below the adjusted flow rate.

The series are recommended for liquid pressure and temperature as mentioned below and must not be used on lines carrying liquids below 0 degree C.

These series may be used on liquids with high salt or chlorine content but is not for use in hazardous atmospheres.

They may be also used outdoors but must be protected from weather or splashing water.
All series flow switches are designed for use only as operating controls.

Where an operating control failure would result in personal injury and/or loss of property, it is the responsibility of user to add safety devices that protect against, or supervisory systems that warn of control failure.
 
 
Specifications 
 

Operating Pressure	10kgf/cm² (1MPa)
Withstand Pressure	17.5Kgf/cm² (1.75MPa)
Insulation Resistence	Over 100Ω, DC500VM
Withstand Voltage	AC1500V/1minute
Contact Point Life	1000K Cycle
Bellows Life	500K Cycle
Temperature of Fluid	Max 100°C (212°F)
Body Size	1"(HTW-WS-25), 3/4"(HTW-WS-20),1/2"(HTW-WS-15)

Product description:

1, Type: HTW-F61KB-11C

2, Pipe connector: 1 in. 11-1/2 NPT Threads

3, Switch contact: SPDT

4, Bellow pipe / blade: phosphor bronze / stainless steel

5, Blade: detachable 1", 2", 3" blades and 6" blade ( uninstalled)

6, Liquid temperature: 0~121ºC

7, Max. Liquid pressure: 1034 KPa

8, Electrical ratings: 120VAC; 208VAC; 240VAC; 277VAC

9, Full load current (A): 16.0; 8.8; 8.0

10, Transient current (A): 96.0; 52.8; 48.0

11, Non-inductive current (A): 16.0

12, other: NEMA 1 shell 1~3" blades

 

Required to actuate switch (m³/h)
Pipe size(in)		1	1-1/4	1-1/2	2	2-1/2	3	4	5	6	8
Min. flow	Flow increase R to B closes	1.0	1.3	1.7	3.1	4.1	6.2	14.8	28.4	43.2	85.2
	Flow decrease R to Y closes	0.6	0.8	1.1	2.2	2.8	4.3	11.4	22.9	35.9	72.7
Max. flow	Flow increase R to B closes	2.0	3.0	4.4	6.6	7.8	12.0	29.1	55.6	85.2	172.6
	Flow decrease R to Y closes	1.9	2.8	4.1	6.1	7.3	11.4	27.7	53.4	81.8	165.8

6" blade

Required to actuate switch(m³/h)
Pipe size(in)		4	5	6	8
Min. flow	Flow increase R to B closes	8.4	12.9	16.8	46.6
	Flow decrease R to Y closes	6.1	9.3	12.3	38.6
Max. flow	Flow increase R to B closes	13.4	26.8	32.7	94.3
	Flow decrease R to Y closes	17.3	25.2	30.7	90.9